Shop

ADT Command Wireless Indoor Siren

(1 customer review)

$130.00

The ADT Command Wireless Indoor Siren is one of the first wireless sirens by ADT that offers chiming capabilities, LED confirmation, volume adjustment and it is fully battery powered.  This device will communicate using the new wireless protocol which uses 24.GHz frequency and endeavors to provide more reliable connectivity, longer range, and battery and RF signal level readings on the ADT Command Smart Security Panel.

SKU: 2471 Categories: ,
Description

Description:

The ADT Command Wireless Indoor Siren is one of the first wireless sirens by ADT that offers chiming capabilities, LED confirmation, volume adjustment and it is fully battery powered.  This device will communicate using the new wireless protocol which uses 24.GHz frequency and endeavors to provide more reliable connectivity, longer range, and battery and RF signal level readings on the ADT Command Smart Security Panel.

Additionally, this siren offers a chime feature that doesn’t rely on the main control panel or the installation of an additional wireless keypad.  Previously, the control panel siren would only sound a full alarm, and you had to install the auxiliary keypad to produce a chime noise outside of the main control panel. But this siren offers an easy way to incorporate siren sound and chime to your Command system. In addition, it only requires 4 AA Lithium batteries!

ADT Command Wireless Indoor Siren

Additional Information:

This siren also uses the ADT Command technology and MUST be enrolled as a wireless zone on your ADT Command Smart Security Panel.  Comparable to any RF Command device, you’ll auto-enroll the device by clicking into the serial number field, and powering it up for the first time OR pressing the tamper switch. Then you’ll need to wait 20 seconds to obtain a solid connection.  The LED light will rapidly flash green for 12 seconds when it stops you’ll then trigger the tamper switch again to lock the device.  The LED should flash solid green for 3 seconds.  Make sure to always incorporate the farthest ADT Command devices from the panel first, after that it is less important.

Features of the ADT Command Wireless Indoor Siren:
  • Mounting Hardware – Included
  • Transmission Range – 300 ft (92 meters) plus*
  • LED Indicators – Yes
  • Sound Pattern – 360 degrees
  • Temperature Sensing Capable – Yes
  • Frequency – 2.4 GHz
  • Encryption – 128-bit AES
  • Battery Life – Five years (typical use)
  • Power Requirements – AA Energizer™ Lithium (Qty 4)
  • Tamper Protected – Yes
  • Operating Temperature – 32°F – 122°F/0°C – 50°C
  • Relative Humidity – 5-95%, non-condensing
  • Dimensions – 5.5″ diameter x 1.8″ depth/
  • 140mm diameter x 46mm depth
  • Approval Listings – FCC/IC, ETL Listed to UL 985 and UL 1023, cETL Listed to ULC-S545 and ULC/ORD-C1023

Note:

Only compatible with the ADT Command Security Panel. Not compatible with the Safewatch Pro, ADT Quickconnect, ADT DSC Impassa, or any other ADT security panel.

Reviews (1)

1 review for ADT Command Wireless Indoor Siren

  1. Henry F

    Works great for indoors, it is loud but not too overbearing. Would recommend. for those with an ADT System.

Add a review

Your email address will not be published. Required fields are marked *