The wall or ceiling mount Long Range Tritech Motion Detector is great if you want a motion detector that can cover a long distance. This detector covers up to 91 m (300 ft). Additionally, the Motion Monitor and Anti-masking protection provides coverage integrity. Field replaceable mirrored optics and three different coverage patterns also provide installation flexibility.

Additionally, this detector is compatible with all hardwired panels.

But if this isn’t what you’re looking for, check out our other motion detectors.

Long Range Tritech Motion Detector Features:

• Supervised microwave and PIR
• Anti-masking with spray detect
• Motion monitor
• Motion Analyzer II
• Field-changeable mirrored optics

Alarm Memory

• Indicates stored alarms for use in multiple unit applications by latching the alarm LED.
• Controlled by a switched voltage from the control panel.

Signal Processing:

The detector uses passive infrared and also microwave technologies to provide an alarm condition when both fields of protection are simultaneously activated. Alarm signals must meet the signaling requirements of both technologies to activate an alarm. It also has adjustable PIR and microwave sensitivity.

PIR Signal Processing

The detector uses Motion Analyzer II multiple thresholds and timing windows to analyze timing, amplitude, duration, and also polarity of signals to make an alarm decision. Additionally, it won’t alarm on extreme levels of thermal and illumination disturbances caused by heaters and air conditioners, hot and cold drafts, sunlight, lightning, and moving headlights. Two sensitivity settings are also provided.

Microwave Signal

This signal uses pattern recognition circuitry to identify and ignore repetitive false alarm sources. Adaptive processing also adjusts to background disturbances to reduce false alarms while maintaining catch performance.

Test Features

The High-efficiency walk test LED is visible throughout the coverage pattern (reducing installation time). The LED also flashes to indicate a trouble condition. Internal noise voltage test pins use standard analog meter to provide precise pattern location and background disturbance evaluation. This is also a separate test LEDs for PIR and microwave activation. Additionally, the alarm LED can be controlled remotely.

Long Range Tritech Motion Detector Specifications:

• Dimensions: 20.8 cm x 19.5 cm x 13 cm (8 in. x 7.5 in. x 5 in.)
• Material: High impact ABS plastic enclosure
• Properties: With steel grid over optics area houses a removable circuit board and also minor holder assembly.
• Operating Temperature: -29°C to +49°C (-20°F to +120°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F)
• Radio Frequency Interference (RFI) Immunity: No alarm or setup on frequencies in the range from 26 MHz to 950 MHz at 50 V/m.
• Height: 3.0  m (10 ft) maximum
• Location: Mounts directly to ceiling or to standard 10.2 cm (4 in.) octagonal electrical box.
• Alarm: Form C reed relay rated at 3.0 W, 125 mA at 28 VDC for resistive loads and protected by a 4.7 Ω, 0.5 W resistor in the common C leg.
• Tamper: Normally-closed tamper switch. Contacts rated at 28 VDC, 125 mA maximum.
• Trouble: Normally-closed dry contacts rated at 28 VDC, 125 mA maximum. Open during trouble.