Description of Long Range Commercial Motion Detector:

The surface or corner mount, Long Range Commercial Motion Detector use Motion Analyzer II signal processing to reduce false alarms. In addition, several unique test features, including Motion Monitor, provide coverage integrity. Furthermore, field replaceable mirrored optics as well as three different coverage patterns provide installation flexibility.

Functions:

Signal Processing:

The Long Range Commercial Motion Detector uses multiple thresholds and timing windows to analyze timing, amplitude, duration, as well as polarity of signals to make an alarm decision. It will not alarm on extreme levels of thermal and illumination disturbances caused by heaters and air conditioners, hot as well as cold drafts, sunlight, lightning, and moving headlights.  Furthermore, three sensitivity settings are also provided.

Test Features:

In addition, external visible alarm LED flashes to indicate trouble condition. Finally, Internal Noise Voltage Test Pins provide precise pattern location and background disturbance evaluation using a standard analog meter. Furthermore, Internal sounder output for use with Sonalert® sounder (not supplied).

Motion Monitor

• Switch-selectable four as well as thirty day timers verify that there is also a clear view of the protection area.

PIR Supervision

• Provides trouble output in the event that PIR circuitry fails.

Specifications:

• Dimensions: 14 cm x 21 cm x 14 cm (5 in. x 7.5 in. x 5 in.)
• Material: High impact ABS plastic enclosure
• Operating Temperature: -29°C to +49°C (-20°F to +120°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F)
• Radio Frequency Interference (RFI) Immunity: No alarm or setup on critical frequencies in the range from 26 MHz to 950 MHz at 50 V/m.
• Compatibility: Complies with Environmental Class II
• Compatible with all hardwired panels.
• Height: 5 m (15 ft.) maximum
• Location: Surface or corner
• Current Draw: 18 mA at 12 VDC 25 mA at 12 VDC (DS794ZE)
• Voltage (Input): 6 VDC to 15 VDC ZX794Z: Power comes from two-wire Zonex Bus. <0.5 mA nominal, 2 mA in alarm with LEDs enabled. Furthermore, Do not leave Walk Test LEDs enabled.
• Alarm: Signal through POPIT data bus.