The Videofied Alpha Keypad is a battery-operated, wireless, alphanumeric keypad designed for the configuring/programming, maintenance and arming/disarming of indoor Videofied systems.

You can use the keypad to program and configure Videofied security systems. S2View® spread spectrum encrypted wireless circuitry effectively makes the keypad a mobile programmer. So you can use it anywhere within the installation site during system programming. Because the keypad is a supervised device, once programming is completed the keypad must be permanently mounted or deleted from the system. The easy-to-understand display guides you through programming, prompting you for simple yes/no or data entry responses.

You should install this keypad near entry/exit doors to allow you enough time to arm and exit the premises, and to enter and disarm the system before time delay expires. When you arm the system, the built-in sounder emits a series of exit delay beeps to remind you to exit. Upon entering the armed premises, the built-in sounder emits entry delay beeps to remind you to disarm the system. A dual tamper function also provides detection for both keypad cover and wall tamper.

The Videofied Alpha Keypad uses three or four lithium batteries that can last up to four years or more. It also transmits a check-in signal every eight minutes. Additionally, Videofied alarm systems support up to three keypads per system.

Product Details

• Temperature range: +14/+104°F (-10/+40°C)
• Can add up to 3 alpha keypads to each control panel
• Built-in sounder provides entry/exit delay beeps and alarm sounds
• Dual tamper provides detection for both wall and cover
• Up to 4 years battery life for low alarm activity
• The XMA621 keypad is a mobile programmer that you can use anywhere on the installation site during system programming
• Typically installed near entry/exit doors to allow system users enough time to arm and exit the premises, and to enter and disarm the system before time delay expires