Product Description:

You can use the Industrial Wide Gap Contact with any wired alarm control panel. Simply connect the commercial contact to a hardwired zone circuit within the alarm control panel to protect any opening. Whether you are protecting an office window or a door to your warehouse, the contact is an ideal choice. You should surface mount the contact and the magnet when installing your Gap Contact. We always recommend installing the magnet on the door or window and the contact on the door or window frame. The reason we suggest putting the contact on the frame instead of the window or door is that there is a delicate reed switch within the contact that could break from a slamming door or window. As the Gap Contact has a wide magnet gap, make sure that when the door or window is closed that there is no more than 2.25” between the magnet and the contact. Industrial Wide Gap Contact is a wide gap commercial contact. It comes in gray.

Industrial Wide Gap Contact commercial contact has a Form A, SPST, normally closed reed switch with a rating of 100mA at 28VDC. You must use a normally closed zone when connecting your Industrial Wide Gap Contact contact to your alarm control panel. There are (2) terminal screws for connecting the (2) conductor alarm wire to the contact. The contact cover completely conceals the terminals screws as well as the mounting screws. Simply pop the cover off the contact to make your connections and install the device to your window or door frame. Once the device is installed and wired, you can pop the cover back up to maintain a nice decor.

Main Features:

Completely hides mounting screws and terminals
Standard gap: 1-3/4″ (45mm)
Ideal for concealing end-of-line resistor (EOL)

Product Specifications:

Switch Type: Form A (SPST) Reed
Contact Rating: 100ma @ 28VDC

Check out the other Hardwired Contacts on this page.

Please check out our YouTube Channel for more information.