The 2GIG Thin Door Window Contact is meant for use with the 2GIG Alarm System and can be installed on doors, windows, and many other objects that open and close. This sensor transmits signals to the control panel when a magnet mounted near the sensor is moved away from or closer to the sensor.

The sensor also has an external input that accepts N/C dry contact devices. And it’s also equipped with cover tamper for additional security.

But if this isn’t what you’re looking for, please look at our other 2GIG products.

2GIG Thin Door Window Contact Features:

• Magnet Dimensions: 1.3 x 0.435 x 0.312 in.
• Sensor Dimensions: 2.59 x 1.03 x 0.49 in.
• Fully supervised
• Lithium batteries with 5 years life
• Reed sensitivity: 0.625 in. minimum gap, 0.85 in. typical
• Tamper protected

Specifications:

• Wireless Signal Range: 350 ft., open air, with 2GIG Wireless Alarm Control Panel
• Code Outputs: Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery
• Frequency: 345.000 MHz (crystal controlled)
• Frequency Tolerance: ± 15 kHz
• Bandwidth: 24kHz
• Modulation Type: Amplitude Shift Keying-On/Off Keying
• Unique ID Codes: Over one (1) million different code combinations
• Supervisory Interval: 70 minutes
• Peak Field Strength: Typical 36,000 uV/m at 3m
• Reed Switch Magnetic Sensitivity: 10 to 20 amp turns
• Reed Sensitivity: 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical
• Magnet Type: Rare earth – ^^
• Magnet Dimensions (LxWxH): 1.3 x 0.435 x 0.312 in. (3.3 x 1.1 x 0.79 cm)
• Sensor Dimensions (LxWxH): 2.59 X 1.03 X 0.49 in. (6.58 x 2.62 x 1.24 cm)
• Weight (including battery & magnet): 1.1 oz. (31.2 g)
• Operating Temperature: 32° to 120°F (0° to 49°C)
• Relative Humidity: 5-95% Non-Condensing
• Battery (included): Two (2) Panasonic CR2032, or equivalent Lithium batteries
• Regulatory Listing(s): ETL, FCC Part 15, Industry Canada

Please check out our YouTube Channel for more information.