Shop
MIGHTY MITE Overhead Door Standard DPDT Switch
$ 50.00
The MIGHTY MITE Overhead Door Standard DPDT Switch is A Mini Overhead Door Switch With Universal. Magnet For Commercial And Industrial Overhead Door Applications.
The MIGHTY MITE Overhead Door Standard DPDT Switch Combines The Installers’ Choice Of Contact Confi Guration With An. N35 Ndfeb Magnet For Maximum Gap Performance. The Closed Loop Versions Of The N200au Prevent False Alarms Caused By The Side. To Side Shifting Of Overhead Doors With Our Unique No Dead Spot Technology
Description
Product Overview:
The MIGHTY MITE Overhead Door Standard DPDT Switch Combines The Installers’ Choice Of Contact Confi Guration With An. N35 Ndfeb Magnet For Maximum Gap Performance. The Closed Loop Versions Of The N200au Prevent False Alarms Caused By The Side. To Side Shifting Of Overhead Doors With Our Unique No Dead Spot Technology
Main Features:
- No Dead Spot technology
- Universal mount
- Extra Wide Gap – N35 Ndfeb Rare Earth Magnet
- 36″ 22awg Wire Leads
- 24″ Armored Cable Lead Protection
- Extruded Anodized (type Ii) Aluminum
- Listed To Ul634 Standard
Technical Information:
- Contact Configuration DPDT
- Contact Resistance 100000 Micro Ohm
- Contact Resistance (Ohm) 0.1
- Lead Gauge 0.87″
- Lead Gauge (mm) 22
- Lead Length 36″
- Lead Length (mm) 914.4
- Magnet Type Permanent Magnet Mounting Type
- Overhead Recommended Use Door
- Standard Gap 2.5″
- Standard Gap (mm) 63.5
- Termination Style Wire Leads
INSTALLATION INSTRUCTIONS:
- With the overhead door closed, position the magnet on the lower right or left side of the door, then align the switch under the magnet. Adjust the position of the switch and magnet to ensure there is adequate clearance between the housings (1/4” minimum).
- Make sure the stainless steel armored cable will not interfere with the door operation.
- Mark the mounting hole locations for the switch and magnet.
- Drill the marked locations on the door using a high-speed drill adequately sized for self-tapping screws or machine screws.
- Mount the magnet on the door.
- Raise the door and drill the switch mounting hole locations using a masonry bit for concrete floors, sized to fit expansion anchors for
#6 self-tapping screws. - Secure the switch to the floor.
- Test the switch by attaching an ohm meter to the switch leads and operate the door.
- Connect the leads to the alarm system conductors.
Please check out our YouTube Channel for more information.
Reviews (1)
1 review for MIGHTY MITE Overhead Door Standard DPDT Switch
Related products
-
Surface Mount Magnetic Contacts with Leads
$ 10.00 -
Surface Mount Hardwired Contact with Terminals GE 1085T
Original price was: $ 20.00.$ 10.00Current price is: $ 10.00. -
This product has multiple variants. The options may be chosen on the product page
Surface Mount Magnetic Contacts with Terminals
$ 20.00 -
ADT Overhead Door Hardwired Magnetic Contact
$ 45.00
Maria Mac –
Great product correct Item delivered!