The DSC Wireless Repeater is a wireless repeater designed to extend the range of DSC one-way wireless transmitters and to improve signal quality between the transmitter and receiver. So use this repeater to remedy transmission problems caused by excessive noise or other interference, or by long distances between devices and receivers. The maximum recommended number of repeaters per alarm system is 4.

Additionally, each enrolled repeater occupies a zone slot. But the repeater does not increase the number of supported wireless zones. This is determined by the control panel’s wireless receiver. In addition, only zones requiring repeat functionality need to be enrolled on the repeater. So make sure you enroll these zones on both the repeater and the receiver/control panel.

DSC Wireless Repeater Features:

• Greatly extends the range of DSC 1-way wireless devices
• Backward compatible with existing security systems including Impassa, ALEXOR, PowerSeries, and also MAXSYS
• Identifies the optimal location for mounting – taking in to consideration noise and interference
• Quick enrollment of DSC 1-way wireless devices
• Status LEDs for AC, battery and RF Jam
• Can support up to four repeaters per system
• Supports up to 164 wireless devices
• Wall and case tamper protection

What’s in the box

• DSC Wireless Repeater (rechargeable Ni-MH battery included)
• Direct plug-in transformer (Not included in all configurations)
• Mounting hardware pack, including plastic wall plugs and also screws
• Installing instructions

Specifications:

• Temperature Range: -10°C to +55°C (14°F-131°F)
• Humidity (Max): 5% – 93% R.H. non-condensing
• Battery Type: Rechargeable Ni-MH, 4.8V/2.1 AH (UL Listed as an LPS. Replace battery every 3-5 years)
• Battery Backup Time: 24 hours
• Charging Rate: 80% within 24 hours
• Battery Charging Current: 170 mA
• Operating Frequency: 433.92 MHz
• Dimensions: H6.96, W4.47, D1.33 in. (H17.68, W11.35, D3.38 cm)
• Weight: 0.77 lb. (.35kg)

Please check out our YouTube Channel for more information.