Shop

Honeywell iPCAM-WL Wired/Wireless Indoor Low-Light IP Camera

(1 customer review)

$220.00

The iPCAM-WL is Honeywell’s previous addition to its video services with Total Connect since replaced by the 720p and 1080p models. This model has been discontinued.  It is the ideal security camera if you are looking to see indoors in daylight or darkness. It has an IR LED to help illuminate when there is a low light situation.
Is the iPCAM-WL Easy to Install?
It is very easy to install by connecting an ethernet cable to the back of it from your internet router or by using the wireless ability. (The wireless ability requires that your router have a WPS button on the back of it – older wireless routers may not have this)

SKU: 1213 Categories: ,
Description

The iPCAM-WL is Honeywell’s previous addition to its video services with Total Connect since replaced by the 720p and 1080p models. This model has been discontinued.  It is an ideal security camera if you are looking to see indoors in daylight or darkness. It has an IR LED to help illuminate when there is a low light situation.
Is the iPCAM-WL Indoor Low-Light IP Camera Easy to Install?
This Indoor Low-Light IP Camera is very easy to install by connecting an ethernet cable to the back of it from your internet router or by using the wireless ability. (The wireless ability requires that your router have a WPS button on the back of it – older wireless routers may not have this)

Features

Video

Video Compression – H.264, MPEG-4 SP, M-JPEG
Video Streaming – Simultaneous H.264, MPEG-4, and M-JPEG
Image Settings – Flip, Mirror, AWB (Auto-White-Balance), AGC (Auto-Gain-Control), Contrast, Sharpness, Brightness
Resolution and Frame Rate – VGA, QVGA, Up to 30 fps (frame per second)

Sensor and Lens

Image Sensor – 1/5″ CMOS Sensor
Minimum Illumination – 0 Lux (with IR LED)
Lens
– Fix Focus Lens, Aperture: F2.0
– Diagonal View Angle: 61° (Horizontal=50°, Vertical=39°)

Network

Ethernet – 10/100 Base-T, Auto-MDIX
Protocols – TCP/IP, HTTP, HTTPS, IPv4, RTSP/ RTP, RTCP, QoS, DHCP, NTP, FTP, SMTP, DNS, DDNS, UPnP, IGMP, ICMP, Customized API Protocol Compatible
Wireless – IEEE 802.11b/g/n, WEP 64/128 bit, WPA/WPA2 Personal

Hardware

Connectors

  • RJ-45 for Ethernet; DC Power Jack

Processors and Memory

  • SoC: ARM9, 300M Hz
  • RAM: 128 MB
  • Flash: 16 MB

LED and Button

  • LED: Power, Network
  • Button: WPS / Reset

Night Vision

  • IR LED x 10
  • Light Sensor x 1

Power Consumption – 12V DC, Max 5.8W

Dimensions (H x W x D) – 79mm x 79mm x 23mm (3.11″ x 3.11″ x 0.91″)

Environment

Operation – Temperature: 0° – 40°C (32° – 104°F); Humidity: 0% – 80% RH (non-condensing)
Storage – Temperature: -20° – 70°C (-4° – 158°F); Humidity: 0% – 90% RH (non-condensing)

Accessories

Ethernet Cable, Power Supply (12V/1A, 100-240VAC)

Please check out our YouTube Channel for more information.

Reviews (1)

1 review for Honeywell iPCAM-WL Wired/Wireless Indoor Low-Light IP Camera

  1. Ryndell Manuel (store manager)

    I really liked how this camera works in low-light areas. Easy configuration also!

Add a review

Your email address will not be published. Required fields are marked *