This ADT Pulse Doorbell Camera Battery Pack is used to modify your ADT Pulse Doorbell into a wireless doorbell –  no need for power wires. This makes it super convenient for anyone that has the ADT Pulse with video to add the ADT Pulse Doorbell at the most ideal location. You don’t have to worry about moving power wires to customize your front door monitoring, the ADT Pulse Doorbell Camera Battery Pack gives you the freedom to conveniently place your ADT Pulse Doorbell wherever you need it.

Previously, the ADT Pulse Doorbell has always needed to have an existing doorbell with 2 wires that provide hardwired power. But, with this new battery pack, you no longer need wires and can install this anywhere.

Well, almost anywhere. You still need to have a Wi-Fi connection to your ADT Pulse Gateway!

Also, it includes 3 Wedges to give you the best viewing angle (15 degrees, 30 degrees, and tilt down). If your doorbell is located on the side of your entryway you can use the 15/30 degree wedges to get a better viewing angle or if you have stairs that lead up to your door, you can use the tilt down wedge to see down the stairs.

How to install the ADT Pulse Doorbell Camera Battery Pack

1. Charge battery pack with micro DC 5V USB power or computer until LED turns green to end the sleep mode
2. Mount Wedge or Wall Plate to the location where you want to install the ADT Pulse Doorbell
3. Turn battery pack on
4. Align the four square pegs on the rear of the battery pack with the slots on the mounting wall plate. Slide into place until you hear it click.
5. Attach the doorbell camera to the battery pack

What comes in the box

1. Battery Pack
2. Wall Plate
3. 3 Wedges (15 degrees, 30 degrees, and tilt down)
4. USB Charging Cable
5. Foam Pad
6. Screws and Anchors

Specifications

Battery Type: Li-polymer
Battery Size: 8000mAh
Input: 5V/1A
Output: 3-4.35V/1A
Dimensions: 4 7/8″ x 2 3/4″ x 7/8″ (battery pack size without a wedge)

Products that work well with this battery pack

ADT Camera Power Supply with Terminals