HD-TVI Bullet Camera 3.6mm 2MP

Price: $110.00

Loading Updating cart...

HD-TVI Bullet Camera 3.6mm 2MP - 1080P camera that can use siamese or RG59 cable. It has 24 IR LEDS that can be used in dark situations to be able to see up to 65ft away. Only compatible with HD-TVI DVRS. (not with old analog DVRS) It is an outdoor/indoor camera that is super easy to mount.  With a 3.6mm lens you have a nice wide angle that is approx. 75 degrees. Is the ideal replacement for the ADT Bullet Camera A-CB7D36PI or the A-CB7D60PI.

      
 
  • 2.1MP High Definition
  • Full HD 1080P
  • 1920X1080P@30fps
  • 3.6mm Fixed Lens
  • 24 IR LEDs up to 65ft
  • Outdoor/Indoor
  • DC 12V
  • IP66
  • UTC
High performance CMOS sensor and high resolution bring high-quality image;
Low illumination ; OSD menu, parameters are configurable; Support auto white balance, auto gain control, electronic shutter control; SMART IR mode;
Unit transmission control; Advanced 3-axis design meets different installation on requirements.

Specifications of the HD-TVI Bullet Camera 3.6mm 2MP

Camera
Image Sensor 1/3"Sensor
Signal System NTSC / PAL(Euro Version)
Effective Pixels 1920(H)×1080(V)
Min. Illumination 0.01 Lux @ (AGC ON),0 Lux with IR
Shutter Speed NTSC: 1/30 ~ 1/50,000
PAL: 1/25 ~ 1/50,000
Lens
3.6mm
Day & Night ICR
Synchronization Internal synchronization
Video Frame Rate NTSC:1080p@30fps/PAL:1080p@25fps
HD Video Output 1  HD-TVI output
S/N Ratio More than 52dB
General
Working Temperature
/Humidity
-4°F - 140°F (-40 °C - 60 °C)
Humidity 90% or less (non-condensing)
Power Supply 12V DC
Power Consumption Max.4W
Weather Proof Ratings IP66
IR Range 65ft(20m)
Dimension φ2.8" × 5.9" (φ70.0 ×149.5mm)
Weight 0.8lb(360g)

Installation Steps:
1.Drill the screw holes and the cable hole in the ceiling according to the supplied drill template.
2.Hammer the supplied plastic expansion bolt into the screw holes.

3.Route the cables to the cable hole and connect the corresponding power cable and video cable.
4.Fix the camera to the ceiling with the supplied screws.

slide_template: default